The only pocket meter that directly measures conductivity in 0.12ml sample and converts it into salinity or salt concentration. No need for a beaker to calibrate the meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
Code: PQ0021
€256.51
2-3 Working Days
Code: PQ0021
Availability: Normally stocked, please enquire
€256.51
The only pocket meter that directly measures conductivity in 0.12ml sample and converts it into salinity or salt concentration. No need for a beaker to calibrate the meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
Features:
- Minimum sample volume: 0.12ml
- Salinity and temperature display
- Up to 2 calibration points
- Auto calibration
- Auto standard recognition: 0.50 & 5.00 % NaCl
- Auto temperature compensation: 2%/ºC fixed
- Temperature calibration: 5 to 40.0 ºC
- 2 Salinity curves: NaCl & Seawater
- Auto stable / auto hold measurement
- Auto power off: 30 mins.
- Low battery indicator
- IP67 Rating dust & waterproof
- Replaceable sensor
- 400 Hours battery life: continuous use without backlight
- Material: ABS epoxy body & titanium coated with platinum black sensor
- Display: custom (monochrome) digital LCD with backlight
- Operating conditions: 5 to 40°C, 85% or less relative humidity
- Warranty: 2 years - meter, 6 months - sensor
- Packed in handy carrying case
- Supplied with 0.5% & 5.0% NaCl standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals
| Measurement Principle | Ion Selective Electrode | Minimum Sample Volume | 0.3ml (0.05ml with sampling sheet B) |
|---|---|---|---|
| Measurement Range | 2 to 9900 ppm (mg/L), 0.1 to 430 mmol/L | Resolution | 0 to 99 ppm: 1 ppm, 100 to 990 ppm: 10 ppm, 1000 to 9900 ppm: 100 ppm |
| Accuracy | ± 10% of actual value | Calibration Points | Up to 2 |
| Temperature Display | 0 to 50.0 ºC | Temperature Calibration | 5 to 40.0 ºC |
| Display | Custom (monochrome) digital LCD with backlight | Operating temperature | 5 to 40.0 ºC |
| Operating Humidity | 85% or less in relative humidity (no condensation) | Power | CR2032 batteries (2) |
| Battery life | Approx. 400 hours in continuous use without backlight | Material | ABS epoxy |
| Dimensions | 164 x 29 x 20 mm (excluding projections) | Mass | Approx. 55 g (including sensor and batteries) |
